![Installation, cont’d](/images/new-backgrounds/114261/11426121x1.webp)
Installation, cont’d
Changing the Front Panel Button Labels
The 16 buttons on the MCP 1000 are not marked for operation. You can remove the button caps to reveal a label plate (see the figure below). Remove each cap and insert a label (icon or text) for each button to identify its assignment. You can use the Extron Button Label Generator (page
Legend
Plate
Key Cap
Clear Cover | Insert identification tag. |
Replacing a button label
You can print labels on transparent or translucent material, and then cut them from a sheet. Also, see the colored
button caps listed in the parts list in the appendix.
Using the Button Label Generator
Installing the software
The program is provided on a
To install the Button Label Generator program from the CD- ROM to the hard drive, run SETUP.EXE from the CD and follow the instructions that appear on the screen. The program occupies approximately 0.5 MB of
By default, the Windows installation program creates a C:\BUTTONS directory, and it places an icon
Using the software
1. | To start the Button Label Generator program, |
| on the Button Label Generator icon (shown at the left) in |
| the Extron Electronics group or folder, and click OK when |
| prompted. |
2. | Under System selection, choose MCP 1000. The Extron’s |
| Button Label Generator window appears (see the figure on |
| the next page). |
Extron’s Button Label Generator window
3. Using normal Windows controls, you can create and print labels that can be placed in the button panel inserts on the MCP 1000 front panel.
For more information about using the program, you can access the Button Label Generator online help by selecting Show Help from the Help menu on the main screen.
MCP 1000 • Installation | MCP 1000 • Installation |