Cisco Systems kygjygcjgf, ASA5515K9 manual Installing and Removing SSDs, 4-22, Detailed Steps

Chapter 4 Maintenance and Upgrade Procedures for the ASA 5500-X

Installing and Removing the Solid State Drive for the ASA CX SSP

Installing and Removing SSDs

To install and remove SSDs in the ASA 5500-X series, follow these steps.

Detailed Steps

Step 1 If you need to remove an old drive, from the front panel of the ASA, remove the SSD by pressing the button on the right side of the bay until the lever is released. Pull out the SSD.

Figure 4-30shows the ASA 5512/5515/5525-X models with one SSD. Figure 4-31shows the ASA 5545/5555-X with two SSDs.

Figure 4-30 Removing the SSD from the ASA 5512/5515/5525-X

334566

Figure 4-31 Removing the SSD from the ASA 5545-X and ASA 5555-X

334566

Step 2 On the front panel of the appliance, line up the SSD carrier with the SSD bay and push it in until it is seated. Push the lever into place.

Cisco ASA 5500-X Series Hardware Installation Guide

4-22