Compaq N160 manual 3. Removing the Hard Drive

Removal and Replacement Procedures

4.Remove the hard drive by following these steps:

a.Turn the computer bottom side up with the front facing you.

b.Remove the silver M3 × 8 screw 1 (Figure 5-3).

c.Use a thin flat tool (screwdriver, case utility tool) to slide the front edge of the hard drive sleeve to the right 2.

d.Remove the hard drive.

Figure 5-3. Removing the Hard Drive

Reverse the above procedure to install the hard drive.

Maintenance and Service Guide 5–5