Compaq N160 manual Removing a Modular Media Bay Device

Removal and Replacement Procedures

5.Remove a modular media bay device by following these steps:

a.Turn the computer bottom side up with the front facing you.

b.Slide and hold the modular media bay release switch 1 toward the back of the computer (Figure 5-5).

c.Use the notch in the modular media bay device bezel 2 to slide the device to the left.

d.Remove the device.

Figure 5-5. Removing a Modular Media Bay Device

Reverse the above procedure to install a modular media bay device.

Maintenance and Service Guide 5–7