Compaq N160 manual 4. Removing the Hard Drive from the Hard Drive Sleeve

Removal and Replacement Procedures

If the hard drive must be removed from the hard drive sleeve, perform the following steps:

a.Remove the four black M3 × 4 screws 1 that secure the hard drive to the hard drive sleeve (Figure 5-4).

b.Lift the hard drive straight up to remove it from the hard drive sleeve 2.

c.Note the orientation and position of the hard drive shield 3 when removing the hard drive from the hard drive sleeve.

✎The hard drive sleeve and shield are included in the Plastics and Hardware Kit (spare part number 251365-001).

Figure 5-4. Removing the Hard Drive from the Hard

Drive Sleeve

5–6 Maintenance and Service Guide