Compaq N160 manual Preparing the Computer for Disassembly

Removal and Replacement Procedures

5.3Preparing the Computer for Disassembly

Perform the following steps before disassembling the computer.

1.Turn off the computer.

2.Disconnect the AC adapter and all external devices.

3.Remove the battery pack by following these steps:

a.Turn the computer bottom side up with the front facing you.

b.Slide and hold the battery release latch toward the back of the computer 1 (Figure 5-2).

c.Use the notch in the battery bezel to slide the battery pack to the left 2.

d.Remove the battery pack.

Figure 5-2. Removing the Battery Pack

Reverse the above procedure to install the battery pack.

5–4 Maintenance and Service Guide