Removal and Replacement Procedures

13.Remove the black M2 × 12 screw 1 that secures the left display hinge (Figure 5-17).

Note the orientation and position of the display hinge bracket 2. Take special care not to lose this bracket when replacing the display.

14.Remove the silver M2 × 10.5 screw 3 that secures the right display hinge.

15.Lift the display straight up to remove it 4.

Figure 5-17. Removing the Display

Reverse the above procedure to install the display.

Maintenance and Service Guide

5–23

Page 90
Image 90
Compaq N160 manual Reverse the above procedure to install the display