Removal and Replacement Procedures

5.13Disk Cell RTC Battery

The disk cell RTC battery is included in the Plastics and Hardware Kit (spare part number 251365-001).

1.Prepare the computer for disassembly (Section 5.3) and remove the following components:

a.Switch cover (Section 5.6)

b.Keyboard and keyboard shield (Section 5.7)

c.Display (Section 5.10)

d.Top cover (Sevtion 5-11)

2.Lift up the back edge of the RTC battery and remove it from its socket on the system board (Figure 5-22).

Figure 5-22. Removing the Disk Cell RTC Battery

Reverse the above procedure to install the disk cell RTC battery.

5–30

Maintenance and Service Guide

Page 97
Image 97
Compaq N160 manual Removing the Disk Cell RTC Battery