Compaq N160 manual Disconnect the speaker assembly cables 2 from the system board

Removal and Replacement Procedures

2.Position the modem/NIC cable 1 so it rests in the empty modular media bay in the base enclosure (Figure 5-26).

3.Disconnect the speaker assembly cables 2 from the system board.

4.Remove the two silver M2 × 6.5 screws 3 that secure the hard drive bracket to the base enclosure.

5.Remove the hard drive bracket 4.

Figure 5-26. Removing the Hard Drive Bracket

Maintenance and Service Guide 5–37