Compaq N160 manual The board tilts up at a 45-degree angle

Removal and Replacement Procedures

2.Disconnect the communications cable from the mini PCI communications board 1 (Figure 5-23).

3.Spread the retaining tabs to release the mini PCI communications board 2.

The board tilts up at a 45-degree angle.

4.Remove the board by pulling it away from the connector at a 45-degree angle 3.

Figure 5-23. Removing the Mini PCI Communications Board

Reverse the above procedure to install the mini PCI communications board.

5–32 Maintenance and Service Guide