Sebo ET-H manual Brush Pressure Adjustment Feature, Indicator Lights Figure

82

Figure 4

The Brush Pressure Adjustment Feature -

Figure 4

The brushing pressure that your ET-H power head applies to your carpet is adjustable from SOFT through HARD. When the brush is set on SOFT, the brush pressure is decreased for a lighter brushing action. For thorough, deep brushing, set the pressure adjustment to HARD.

The brush pressure adjustment dial is located on the top side of the power head (# 2, figure 4). To adjust the dial to SOFT, spin the dial in the direction of the arrow (#8, figure 4). To adjust the brush action to HARD, turn the dial in the opposite direction of the arrow (#8, figure 4).

5

Figure 5

Indicator Lights - Figure 5

The green and amber indicator lights are located on the top of the power head (# 5, figure 5).

Green Light:	Motor is on, power head is ready
	for operation. The green light
	remains	illuminated	when the
	handle is in the upright locked
	position and when it is lowered to
	its operating position. However,
	the green light will shut off when
	the power control slider located on
	the handle is in the OFF position.
Amber Light Flashing:	Motor is	on, brush	is adjusting
	to carpet pile.
Green and Amber Lights:	Motor shuts down, brush stops
	spinning - indicates a shut down
	due to overload, clog or jammed
	brush roller.

Page 7