Sebo ET-H manual Identification of Parts, E A C, Page

4 7

3

5

6

B

E

2

6a

1

A

Identification of Parts

1.Power head

2.Brush pressure adjustment

3.Swivel neck

4.Connection plug

5.Indicator lights

6.Brush roller end cap

6a. Edge-cleaning brush roller end cap

7. Telescopic Tube release button

Attaching the Power Head to the Telescopic Tube of your SEBO C3.1 or K3 Vacuum

1.Find the connection tab (A) at the base of the telescopic tube (B).

2.Move the connection tab (A) OUT away from the tube (C). See enlarged detail below. It will only move approximately 1/8-inch. NOTE: the tab must not be forced beyond the “flush” position of the collar. Proceed to step 3.

3.Insert the base of the telescopic tube (E) into the power head swivel neck (3). Make sure that the connection tab (A) is prop- erly aligned with the connection plug (4) in the swivel neck. Damage to the connection may occur if the tab and the plug are not properly aligned.

E

A

C

Page 5