Compaq N160 manual Removing the Sub I/O Board

Removal and Replacement Procedures

4.Disconnect the modem/NIC cable 1 from the sub I/O board (Figure 5-25).

5.Lift up the right side of the sub I/O board 2 until it clears the base enclosure.

6.Slide the sub I/O board to the right 3 to disconnect it from the system board.

Figure 5-25. Removing the Sub I/O Board

7. Remove the sub I/O board.

Reverse the above procedure to install the sub I/O board.

Maintenance and Service Guide 5–35