Compaq N160 manual

Models: N160

1 157
Download 157 pages 24.95 Kb
Page 93
Image 93
7.Release the ZIF connector 1 to which the TouchPad cable is attached and disconnect the TouchPad cable 2 from the system board (Figure 5-19).

Removal and Replacement Procedures

7.Release the ZIF connector 1 to which the TouchPad cable is attached and disconnect the TouchPad cable 2 from the system board (Figure 5-19).

8.Remove the two black M2 × 9 screws 3 and the silver M2 × 7 screw 4 that secures the top cover to the base enclosure.

Figure 5-19. Disconnecting the TouchPad Cable and Removing the Top Cover Screws

5–26

Maintenance and Service Guide

Page 93
Image 93
Compaq N160 manual