Short-Circuit Protection Warning

Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045

Compliance with Local and National Electrical Codes Warning

Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074

DC Power Connection Warning

Warning After wiring the DC power supply, remove the tape from the circuit breaker switch handle and reinstate power by moving the handle of the circuit breaker to the ON position. Statement 8

AC Power Disconnection Warning

Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units. Statement 246

TN Power Warning

Warning The device is designed to work with TN power systems. Statement 19

48 VDC Power System

Warning The customer 48 volt power system must provide reinforced insulation between the primary AC power and the 48 VDC output. Statement 128

Multiple Power Cord

Warning This unit has more than one power cord. To reduce the risk of electric shock when servicing a unit,

disconnect the power cord of the power strip that the unit is plugged into. Statement 137

Circuit Breaker (15A) Warning

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Statement 13

Cisco ASA 5500-X Series Hardware Installation Guide

xi

Page 11
Image 11
Cisco Systems kygjygcjgf, ASA5515K9, ASA5525IPSK9, ASA5512AW1YPR, ASA5555IPSK9 manual Circuit Breaker 15A Warning