HP 3000 Sheet-feed manual Scanner software, Scanner lamp setting, Scan Progress Window

See also

Useful scanner features

Scanner lamp setting

The scanner lamp turns off after each scan. After about 15 minutes of inactivity, the scanner automatically enters its Sleep (Power Save) mode. To start a scan when the scanner is in Sleep mode, simply press the Power button or load originals into the document feeder.

Scanner software

The scanner comes with an assortment of scanning and document-management programs, including:

•HP Scanjet 3000 scanner driver (TWAIN and WIA))

•Nuance OmniPage software application (TWAIN)

•Nuance PaperPort software application (TWAIN)

•NewSoft Presto! BizCard software application (TWAIN)

How to scan with the HP Scanjet 3000 scanner driver

To start a scan, you need to install the HP Scanjet 3000 scanner driver and the TWAIN-compliant scanning software applications. HP recommends installing all of the bundled software applications. Start one of the applications. Select the TWAIN data source to display the HP Scanjet 3000 TWAIN user interface. (Different applications provide different methods for displaying the TWAIN user interface. It is often accomplished by selecting "Scanner Settings" or "Acquire".) Click the Scan button on the TWAIN user interface to start a scan. For more information on how to use the TWAIN-compliant software application, please refer to the Software Help provided by the application.

Use the HP Scanjet 3000 TWAIN user interface to start a scan:

Start a scan: Load the original in the auto document feeder, and then click Scan. The scan will be completed using the default settings.

Scan Progress Window

The Scan Progress Window opens when you start a scan. Use this window to complete the following tasks:

•Cancel a scan.

•Complete the scan and process the document

For more information, click Help on the HP Scanjet 3000 TWAIN user interface.

See also

Scan a document

4 HP Scanjet 3000 Scanner