▼Direct WallMounting
If you do not havea standard wall plate, you can mount your
phone directly on a wall.Before doing this, consider the
following:
•Select a location awayfrom electrical cables, pipes, or other
items behind the mounting location that could cause a hazard
when inserting screws into the wall.
•Mount yourphone within 10 feet of a working phone jack.
•Makesure the wall material can support the weight of the base
and handset. Use anchoring devices if necessary.
•Usethe #10 screws included with the wall mount adapter kit.
1) Insert 2 mounting screws 3-15/16inches apart.
Allow about 3/16of an inch between
the wall and screwheads
for mounting the phone.
2) Follow“Standard Wall
Plate Mounting”
steps 1 through 4
on page 4.
3) Plug one end of the
telephone cord into the
TEL LINE
jack on the base. Put the
cord inside the molded channel on the bottom of the base.
4) Place the base on the screws and push downuntil it’s
firmly seated.
5) Plug the ACadapter into a standard 120 VAC wall outlet.
DO NOT use an outlet controlledby a wall switch.
6) Beforeyou plug the other end of the telephone cord into the
modular jack on the wall, chargethe batter y.Refer to
“Charging the Battery Pack,” page6.
5
SETTING UP
!
DONOT use an outlet
controlledby a wall switch.
!
UseONLY the Uniden AC
adaptersupplied with
thisphone.
CAUTION
Beforeyou plug the other
endof the telephone cord
intothe modular jack on
thewall, charge the
battery.Refer to “Charging
theBatter y Pack,”page 6.
I:...exv958final.vp
Fri Jun 19 20:14:58 1998
Color profile: Disabled
Composite Default screen