![TO REPLACE BELT](/images/new-backgrounds/53950/5395025x1.webp)
m | i | TO REPLACE BELT |
| ||
WARNING | OR BRUSHROLL |
Electrical Shock and Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit, Failure to do so could
result in electrical shock or personal injury from vacuum cleaner suddenly starting.
t Slide belt onto motor MOTOR shaft.
SHAFT
TO REMOVE BELT
Lay cleaner flat and flip cleaner to expose nozzle base° To remove nozzle guard, slide lock A to unlock position, to the lefL Then depress lock B to unlock nozzle guard.
Place new belt in area of brushroll without bristles°
With new belt in place, pull and slide brushroll
END CAll
into nozzle making
Rotate/pivot the nozzle guard and pull off
sure that the brushroll end caps are in the correct orientation (see diagram for end cap orientation). Rotate brushroll manually
to make sure belt is properly aligned,.
Secure by aligning the three (3) tabs in the base slots.
To reattach nozzle guard, rotate/pivot back into position,
Lift and remove | B |
\o I brushrolL Dispose of old belt.
To secure nozzle
guard, push lock B down to lock position. Slide lock A into lock
position, to the right.
t3