Review this table to find
WARNING
Disconnect electrical supply before performing maintenance to the unit.
Failure to do so could result in electrical shock or personal injury.
, POSSlBLECAUSE :_
Cleaner won't run 1. Power cord not firmly plugged into outlet,
2.Btown fuse or tripped breaker°
3.Thermal Protector activated
4, Needs service,
1.Plug unit in firmly,
2.Check fuse or breaker in home. Replace fuse/reset breaker
3.Allow cleaner to cool- Pg, 5
4.Take to Sears Service Center
Cleaner won't pick up or low suction
1.Dirt container not installed correctly,
2.Dirt container full
3, Brushroll worn,
4.Broken or worn belt,
5.One or both filters clogged
6o Carpet height setting is incorrecL
1, Review DIRT CONTAINER REMOVAL AND
2.Empty dirt container- Pg_ 1 t, 3, Replace brushrotl- Pg 13
4.Replace belt- Pg. 13
5o Remove filters and clean _Pg. 11, 12
6. Set carpet | height adjust ever to appropriate |
setting for | carpet being cleaned - Pg 9. |
Dust escaping from cleaner
Cleaner tools won't
1o Dirt container full
2.Dirt contalnernot Installed
correctly
3, Hose not installed correctly
4, One or both filters not Installed completely
1.Hose clogged
2_ Dirt container full
3, One or both filters clogged,
1. Empty dirt container- Pg 11, |
2o Review DIRT CONTAINER REMOVAL AND
3.Review hose placement- Pg 6
4, Review filter removal and replacement-
Pgtf. 12
1.Check inlets, hose and dirt container for
obstructions; remove obstruction if clog
persists,
2, Empty dirt container _ Pg 11
3.Clean filters - Pg 11, 12,
Headlight | not | t. | Bulb burnt out, |
| |
working |
| 2, | Loose | electrical | wires |
Cleaner | is difficult | 1. | Carpet | height setttngis | |
to push |
|
| incorrect, |
| |
|
| 2, | Broken | orworn | belt, |
1.Replace bulb- Pg 14
2o Take to Sears Service Center
1, Set carpet height adjust lever to appropriate setting for carpet being cleaned - Pg 9
2.Replace belt - Pg, 13
For any questions, please call 1-877-839-2046.
15
