![denly starting.](/images/new-backgrounds/52180/5218027x1.webp)
WARNING
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicing or cleaning the unit. Failure to do so could result
in electrical shock or personal injury from vacuum cleaner sud-
denly starting.
TO REMOVE LIGHT BULB
1.Disconnect power cord from eleclrical outlet
2.Press handle release pedal and lay vacuum cleaner back.
3.Grasp the edge of the exhaust cover. Pull out edges of exhaust cover and lift off,
4, Remove the two (2) screws from the lens cover.
1.Locate the lower intake hose.
2.Rotate lower intake hose cuff clockwise into the unlock position°
CAUTION
Do not use a bulb rated over 9W
(13V). During extended use, heat from the bulb could overheat
surrounding plastic parts.
5. Insert fiat blade of
screwdriver into slot at
top of the lens.Lift the lens cover to remove.
6.Pull bulb out of socketo
Do NOT twist. Gently push replacement bulb into socket to replace°
7.Snap lens cover back into place and secure
the headlight lens by replacing the two screws° Replace exhaust cover,
Note: See separate PARTS LIST for bulb number.
3, Disconnect the hose by
pulling down on the lower intake hose cuff.
4.Remove debris from inside the hose.
removed, locate the
2.Once brushroll is nozzle valve_
1.Follow instructions on page 13 for removing nozzle guard and brushrolL
-"_L,"__.'. A
3.Remove debris from inside the nozzle valve.
4.Return brushroll and nozzle guard,
t4