OPERATING INSTRUCTIONS
1.Rotate the quick release upper cord hook to either side and down to release
the power cord.
m
2, Unclip the power cord \ plug from the power cord. Make sure the power
cord is placed into the cord clip on the body as shown.This helps keep the power cord out from under the vacuum cleaner
|
|
|
| II |
nozzle. |
|
| // | |
3, Plug | the polarized | // | ||
power | cord | into a 120 | II | |
Volt | outlet | located near | FltJ | |
the | floor° |
| f | |
4. To store cord, turn upper cord hook to the up position, then wrap cord.
WARNING
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than
the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet7 reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
Personal Injury and Product
Damage Hazard
•DO NOT plug in if switch is in the ON position. Personal injury or damage could result.
. DO NOT use outlets above counters. Damage from cord to items in surrounding area could occur.
