3, Pull the front of the shelf forward until it fits into place.

Your model may have glass or wire shelves. Store similar foods together and adjust the shelves to fit different heights. This reduces the time the refrigerator door is open and saves energy.

Slide-out Shelves (on some models)

To remove and replace a shelf in a metal frame:

1.Pull the shelf forward to the stop. Tilt the front of the shelf up and lift it slightly as you pull the shelf from the frame.

2.Replace the shelf by guiding it back into the slots on the frame and pushing the shelf in past the stop.

De i

r

The dell drawer stores raisins, nuts, spreads, and other small items at normal refrigerator temperatures.

To remove and replace the dell drawer:

1.Remove the dell drawer by sliding it straight out to the stop. Lift the front and slide the drawer out the rest of the way.

2.Replace the dell drawer by sliding it back past the stop.

Shelves and Shelf Frames

To remove and replace a shelf/frame:

1.Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports.

2.Replace the shelf/frame by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports. Check to make sure that the shelf is securely in position.

(on some mode @

To raise or lower the shelf:

1.Raise the shelf by pulling forward on the lever located at the bottom front of the shelf and lift until the shelf locks into the

vertical position.

2.Lower the shelf until it is latched securely in place.

C®nvert b e

Ue/Meat D swet;

Crisper

and Covers

(sn :s©se re©de s}

Crisper and Convertible Vegetable Meat Drawers

To remove and replace drawers:

1.Slide crisper or meat drawer straight out to the stop. Lift the

front of drawer with one hand while supporting the bottom of drawer with other hand and slide the drawer out the rest of

the way.

2.Replace the crisper or meat drawer by sliding it back in fully past the drawer stop.

Crisper or Vegetable/Meat Drawer Covers

To remove and replace covers:

1.Remove the crisper and meat drawer. Press up in center of crisper glass insert until it rises above the plastic frame. Holding the crisper glass firmly, carefully slide the glass insert forward to remove.

2.Lift crisper cover frame and remove. Repeat steps to remove the meat drawer cover.

Ac ju@!sb,, e S ipo¢@She f

(onsome mode ®

To raise or lower the shelf:

1.Raise the shelf by first sliding it back and down to make it half-width. (You can use the shelf in this position to allow taller items to be stored on the shelf below.)

2.Lift the front of the shelf until it fits securely in place against the back wall. Lower the shelf securely back into position.

3.Replace back of meat drawer cover frame into supports or slides on side walls of the refrigerator and lower or slide the front of the cover frame into place.

4.Slide rear of glass insert into cover frame and lower front into place. Repeat steps to replace the crisper cover.

13

Page 13
Image 13
Kenmore 2220698 manual Ac ju@!sb,, e S ipo¢@She f, Cnvert b e Ue/Meat D swet Crisper Covers