Digital Controls
For your convenience, your controls are preset at the factory. When installing your refrigerator, make sure that the controls are still preset to the
NOTE: The factory recommended set points are 0°F
To turn refrigerator on and view set points:
•Press and hold ON/OFF for 2 seconds.
C0LD | FREEZER | REFRIGERATOR | C0LD |
COLDER | COLDER |
To view the Celsius temperatures:
•Press the °C SELECT touch pad. The indicator will light up.
NOTE: If the freezer temperature is below zero, the indicator light next to the freezer display will light up.
Adjusting Digital Controls
To adjust set point temperatures:
•Press the refrigerator or freezer up or down arrow until the desired temperature is reached.
REFRIGERATOR COLD
COLDER
NOTE: Wait at least 24 hours between adjustments and then recheck the temperatures before other adjustments are made.
The set point range for the freezer is
CONDITION/REASON: | TEMPERATURE |
| |
|
| ADJUSTMENT: |
|
REFRIGERATOR | too cold | REFRIGERATOR |
|
- Not set correctly | for your | Control 1o higher |
|
conditions |
|
|
|
REFRIGERATOR | too warm | REFRIGERATOR |
|
- High use or room very warm | Control 1o lower |
| |
FREEZER too cold | FREEZER Control | 1° | |
- Not set correctly | for your | higher |
|
conditions |
|
|
|
FREEZER too warm/too little ice | FREEZER Control | 1o | |
- High use or heavy ice use | lower |
| |
Additional Digital Control Panel Features
Additional features are located on the control panel at the top of the refrigerator compartment.
GrocerySavor TM
The GrocerySavor TM feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.
•Press GrocerySavor TM to set the temperatures to
NOTE: The temperature display will not change. After
24 hours, the refrigerator and freezer compartments return to the previous temperature set points.
Accelerated Ice Production
This feature assists with temporary periods of heavy ice use by increasing ice production over a
•Press the accelerated ice production touch pad to set the freezer temperature to
NOTES:
•The temperature display will not change. After 24 hours, the freezer temperature returns to the previous temperature set point.
If increased ice production is desired at all times, set the Freezer control to a colder number. Setting the freezer to a
colder temperature may make some foods, such as ice cream, harder.
Cut Hazard
Use a sturdy glass when dispensing ice or water.
Failure to do so can result in cuts.
Your electronic dispenser offers several options: the ability to select crushed or cubed ice, a special light that turns on when you use the dispenser and can be set to Auto mode, and a lock option to avoid unintentional dispensing.
10
