TO ADJUSTTHE SHELVES
,,Lift front edge up.
,,Pull shelf out
,,Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position.
To | Remove | Light Lens | _ |
|
|
| Press | Tabs | _ | _ | _.._ |
in | Direction | Showm. | /. | / |
|
Mid Level Lighting
/ \o
CRISPERSWITH ADJUSTABLE DiViDERS
The crispers, located at the bottom of the freezer shelf, provide separate storage space for items that are difficult to store on freezer slelves.
AiR FILTER
The air filter is located on the back of the control box. In general, you should change the air filter every six months to ensure optimal filtering of freezer odors. You may want to adjust this time period depending on the types and amounts of food you typically store in your freezer.
TO REPLACETHE AiR FILTER:
MiD LEVEL LiGHTiNG
The mid level lighting is located at the back of the crispers. The lights come on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Remove the lens from the lamp housing by unsnapping it from the lamp housing using your fingers or a screwdriver. Be careful not to break the locking tabs on the lamp housing. Replace the old bulb with a bulb of the same type and wattage. To replace the lens, snap one side of the lens opening
to the tab on the lamp housing. Then carefully attach the other side.
,,Push the plastic bubble tab at the back ot the control box housing. This releases the hinged bottom half to drop open.
,,Remove the old filter
and discard | it. |
| PushTab |
,, Unpackage | the | new | to Roloase |
FIIterCover. | |||
filter and place it inside |
| ||
the hinged | bottom | half |
|
of the housing. |
| _t_ | |
,,Push the hinged bottom half upward until the tab
snaps into closed position.
/
/
Air Flbr
DOOR MOUNTEDTEMPERATURE GAUGE
The door mounted temperature gauge displays the cabinet internal temperature.
