Adjusting the Needle Thread Tension for

Zigzag Stitch

For an ideal zigzag stitch, the bobbin thread does not show
on the right side (Top side) of the fabric, and the needle
thread shows slightly on the wrong side (Bottom side) of the
fabric..
See the illustrations for thecorrect appearance
To match this appearance, adjust the needle tension
=Correct tension
_Right side (Topside) offabric
_ Wrong side (Bottom side) of fabric
Minimize the amount ofneedle thread visible on the
wrong side (Bottom side) of the fabric without causing
excessive puckering, or causing the bobbin thread to
show on theright side (Top side) ofthe fabric.
Results vary with fabric, thread and sewing conditions
,,Tension is too tight
Right side (Top side) of fabric
_ Wrong side (Bottom side) of fabric
The corner of each zigzag pulls together on the right side
of the fabric
,,Tension is too loose
(_ Right side (Top side) of fabric
(_._Wrong side (Bottom side) of fabric
The corner of each zigzag pulls together on the wrong
side of the fabric..

f

f
/-
®

O @

O ®

J

J
32