Corded Buttonhole
_i_)Stitch pattern:
(_)Needle thread tension
(_i.iPresser foot R:
_i) Pressure dial
I2
t to 5
Automatic buttonhole foot
3
Use the same procedure as the square buttonhole
procedure.
* Set the stitch width to match the thickness of the cord
used,.
• To sew
[9 With the buttonhole foot raised, hook the filler cord on
the spur at the back of the buttonhole foot.
Bring the ends toward you under the buttonhole foot,
clearing the front end.
Hook the filler cord into the forks 4_)on the front of the
automatic buttonhole foot to hold ti_em tight.
Lower the needle into the garment where the buttonhole
wiit start, and lower the foot..
_; Spur
!_.)Forks
1_}Press the start/stop button and sew the buttonhole
Each side of the buttonhole and the bartacks will be
sewn over thecord.
Remove thefabric from the machine, and cut the sewing
threads only
(_ Needle thread (Topthread)
(_)Bobbin thread (Bottom thread)
Pull the loose ends of the filler cord to tighten it..
Tie the ends in a knot, orthread them through a hand-
sewing needler Draw them to the wrong side ofthe fabric
and knot.
f
J
39