%%

GY "_

-®

®, ®

j,

SECTION Vii. CARE AND MAINTE-

NANCE

WARNING:
•Turn the power switch off and unplug the machine
before cleaning.
•Do not dismantle the machine other than as explained
in thissection.
CAUTION:
•Do not store the machine in a high-humidity area, near
a heat radiator, or in direct sunlight,
Note:
Clean the outside of the machine with a soft cloth and
neutral soap
After cleaning the machine, make sure the needle and
presser foot are attached.
Cleaning the Hook Race and Feed Dogs
Remove the setscrew on the needle plate with the
screwdriver supplied with the machine Remove the needle
plate.
Take out the bobbin. Lift up thebobbin holder' and remove
iL
[_ Clean the bobbin holder with alint brush,
(You may also use a vacuum cleaner )
Clean thefeed dogs and hook race with the lint brush
Clean the hook race with adry cloth,
(You may also use avacuum cleaner)
Screwdriver
(_ Setscrew
Needle plate
(_) Bobbin holder
(_) Lint brush
.¢_ Feed dogs
(_ Hook race
(_ Soft dry cloth
Assemble the Hook Race
Insert the bobbin holder.
[_ The knob ofthe bobbin holder' should fit next tothe Stopper
in the hook race,.
Reattach the needle plate, aligning theneedle plate guide
pins with the guide holes onthe needle plate and tighten
the screw,,
<.9_ Stopper
@_ Knob
(U) Guide holes
N-ote:
After cleaning the machine, make sure the needle and
presser foot are attached
76