Kenmore 415.1615111 manual Storing Your Grill, See Illustration At right, Correct

CAUTION

f

SPIDER ALERT!

if you notice that your griIJ is getting hard to light or that the flame isn'tas strong as it should be, take the time to check and dean the burner tubes.

SPIDER WEBS

CONTROL PANEL INSIDE BURNER TUBE

i BURNER

Spiders or smafl insects have been known to create "flashback" problems. The spiders spin webs, buiJd nests and Jay eggs in the griIVs burner tube(s) obstructing the flow of gas to the burner. The backed-up gas can ignite in the burner tube behind the controJ paneJ. This is known as a flashback and it can damage your grill and even cause injury.

To prevent flashbacks and ensure good performance the burner and burner tube assembly should be removed from the griJl and cleaned before use whenever the grill has been idle

r an extended period, j

Storing Your Grill

3.Remove carryover tubes and burners.

4.Detach electrode from burner.

NOTE: Removal/Detachment method will depend on the burner configuration. See different configurations in illustrations below.

5.Carefully lift each burner up and away from valve openings. We suggest three ways to clean the burner tubes. Use the one easiest for you.

(A)Bend a stiff wire (a light weight coat hanger works well) into a small hook. Run the hook through each burner tube several times.

(g) Use a narrow bottle brush with a flexible handle (do

not use a brass wire brush), run the brush through each burner tube several times.

(C)Wear eve protectlan: Use an air hose to force air into the burner tube and out the burner ports. Check each port to make sure air comes out each hole.

6.Wire brush entire outer surface of burner to remove food residue and dirt.

7.Clean any blocked ports with a stiff wire such as an open paper clip.

8.Check burner for damage, due to normal wear and corrosion some holes may become enlarged. If any large cracks or holes are found replace burner.

VERY iMPORTANT: Burner tubes must reengage

valveopenlngs.	See	illustration	at right.
9. Attach electrode		to burner.	Correct
			burner-to-valve
10. Carefully	replace	burners,	engogemei

11.Attach burners to brackets on firebox.

12.Reposition carryover tubes and attach to burners. Replace flame tamers and cooking grates.

"Clean cooking grates.

"Store in dry location.

"When LP cylinder is connected to grill, store outdoors in a

well-ventilated space and out of reach of children.

"Cover grill if stored outdoors. Choose from a variety of grill covers offered by manufacturers.

"Store grill indoors ONLY if LP cylinder is turned off and disconnected, removed from grill and stored outdoors.

"When removing grill from storage, follow "Cleaning the Burner Assembly" instructions before starting grill.

Cleaning the Burner Assembly

Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill.

1.Turn gas OFF at control knobs and LP cylinder.

2.Remove cooking grates and flame tamers.

Firebox burner bracket

Electrode

464220311 o 9