• Donotgroundtoagaspipe.• Checkwithaqualifiedelectricianifyouarenotsurethewasherisproperlygrounded.• Donothavea fuseintheneutralorgroundcircuit.

GROUNDING mNSTRUCTJONS

EHectrical Shock Hazard
Plug into a grounded 3prong outBet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Faimureto foffow these instructions can resuJt in death,
fire, or emectrical shock.
A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical
supply is required. A time-delay fuse orcircuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.
This washer is equipped with a power supply cord having a
3 prong grounding plug.
To minimize possible shock hazard, the cord must be
plugged into a mating, 3 prong, grounding-type outlet,
grounded inaccordance with local codes and ordinances. If a
mating outlet is not available, it is the personal responsibility
and obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.
For a grounded, cord-connected washer:
This washer must be grounded. Hnthe event of a malfunction
or breakdown, grounding wilI reduce the risk of electrical
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into anappropriate outlet that is
properly installed and grounded inaccordance with alllocal
codes and ordinances.
WARNING: Hmproperconnection of theequipment-
grounding conductor can result ina risk ofelectric shock.
Check with a qualified electrician or serviceman if you are in
doubt asto whether the appliance is properly grounded.
Do not modify the plug provided with the appliance - if it will
not fit the outlet, have aproper outlet installed by a qualified
electrician.
For a permanently connected washer:
This washer must be connected to agrounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the appliance.
Ifcodes permit and a separate ground wire is used, it is
recommended that aqualified electrician determine that the
ground path is adequate.