INSTALLATION REQUIREMENTS

Your air conditioner will install into standard double hung windows with actual clear opening widths of 22 to 36 inches (558mm to 914mm) (FIG. 1).

Lower sash must open sufficiently to allow a clear vertical opening of 14 inches (356mm). Side louvers and the rear of the air conditioner must have clear air space to allow enough air[low through the condenser for heat removal. The rear of the unit must be outdoors, not inside a building or garage.

(3====13

14"min.

Innersill

""....

"

FIG. 1

ELECTRICAL SERVICE

Check your available electrical service. The power supply available must be the same as that shown on the unit nameplate (found on left side of cabinet).

All models are equipped with a 3-prong service plug to provide proper service and safe positive grounding. Do not change plug in any way. Do not use an adapter plug. If your present wall outlet does not match your plug, call a qualified electrician to make the necessary corrections. SAVE CARTON and this OWNER'S MANUAL for future reference. The carton is the best way to store unit during winter or when not in use.

INSTALLATION

HARDWARE

ITEM A: 11EA

ITEM B: 4EA

SHORT

SCREW

WOOD SCREW

 

 

 

!,

ITEM

C: 3EA

ITEM D: lEA

L BRACKET

SEAL STRIP

 

 

 

(Adhesive backed)

 

 

 

-

ITEM

E: lEA

ITEM F: 2EA

SASH

SEAL

GUIDE PANEL

(Not adhesive

backed)

 

ITEM G: lEA

DRAIN PIPE

To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:

•Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install the unit.

To prevent injury or strain, use proper lifting and carrying techniques when moving unit.

•Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over an extended period of time.

•Handle air conditioner with care. Wear

protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils.

•Make sure air conditioner does not fall during installation.

REQUIRED TOOLS:

•Tight Fitting gloves

•Standard screwdriver

•Phillips screwdriver

•Pliers

•Sharp knife

•Carpenters level

•3/8-inch open end

wrench or adjustable wrench

•1/4-inch hex socket and ratcher

•Tape measure

•Electric drill

•1/4-inch drill bit

-5-

Page 4 Page 6
Page 5
Image 5
Kenmore 580.72053 owner manual Installation Requirements, Installation Hardware, Electrical Service, Required Tools
Page 4 Page 6

580.72053 specifications

The Kenmore 580.72053 is a standout air purifier designed to enhance indoor air quality by effectively removing allergens, odors, and airborne particles. This model exemplifies a blend of advanced technology and user-friendly features that cater to various needs, making it a popular choice among consumers.

One of the main features of the Kenmore 580.72053 is its multi-stage filtration system. This system typically includes a pre-filter, a true HEPA filter, and an activated carbon filter. The pre-filter captures larger particles such as dust and pet hair, which aids in extending the life of the more critical filters. The true HEPA filter is instrumental in trapping 99.97% of tiny particles as small as 0.3 microns, such as pollen, smoke, and mold spores. This feature is particularly beneficial for individuals with allergies or asthma. The activated carbon filter effectively absorbs odors and harmful gases, ensuring that the air remains fresh and clean.

In addition to its powerful filtration capabilities, the Kenmore 580.72053 incorporates several modern technologies. It may feature smart sensor technology that monitors air quality in real-time and adjusts the fan speed accordingly. This ensures optimal performance without unnecessary energy consumption. The unit may also come equipped with a programmable timer and various fan speed settings, allowing users to customize operation according to their specific needs and schedules.

One of the standout characteristics of the Kenmore 580.72053 is its whisper-quiet operation. Designed with noise-reduction features, it allows for use in bedrooms or other quiet spaces without disturbing activities. This makes it ideal for nighttime use, providing peace of mind while ensuring the air remains clean.

Portability is another advantage of the Kenmore 580.72053. With its compact design and lightweight structure, it can easily be moved from room to room, making it a versatile addition to any home. The user-friendly interface typically includes intuitive controls and indicator lights that inform users when filters need replacement, ensuring the unit operates at peak efficiency.

Overall, the Kenmore 580.72053 stands out for its thorough air purification capabilities, advanced technology, and user-centric features. Its combination of effective filtration, quiet operation, and portability makes it a solid choice for those looking to improve their indoor air quality.
Top Page Image Contents