Connecting and Disconnecting Portable Dishwasher

The portable dishwasher must be connected to a faucet and electrical outlet each time it is used. Follow directions on this page to properly connect dishwasher.

Faucet Adapter Assembly (Figure A)

Connecting the

Portable Faucet

Adapter Assembly

(Figure B)

IMPORTANT: Make sure door is latched before moving dishwasher.

The power cord and faucet coupler with hoses are located in a compartment in back of dishwasher. A special adapter must be installed on faucet before you can connect dishwasher (Figure A).

1.Remove faucet adapter assembly from literature package.

2.Unscrew existing sink faucet aerator.

3.Check faucet spout to see if threads are inside or outside.

•If threads are on inside of faucet spout, use both rubber washers.

•If threads are on outside of faucet spout, use one rubber washer only.

•If faucet has no threads, an adapter kit with instructions for attachment to a non-threaded spout is available at most hardware stores.

4.Assemble faucet spout as shown in Figure A.

Connecting the Portable Dishwasher

1.Run water at faucet until it is hot. Turn off faucet.

2.Pull hoses out of compartment.

3.Push collar down and slip faucet connector onto faucet adapter (Figure B). 4.When connector snaps into place, release collar.

5.Slowly turn on hot water all the way. 6.Plug power cord into grounded outlet.

Disconnecting the Portable Dishwasher

1.When cycle has finished, unplug power cord and return it to compartment. 2.Turn off hot water.

3.Press red button on coupler to release water pressure. 4.Press down on collar to release coupler.

5.Empty remaining water from coupler and return it to compartment.

IMPORTANT: A sink spray hose can burst due to constant water pressure while in use. If your spray hose is installed on same water line as the dishwasher, it is your responsibility to disconnect sink's spray hose and to plug hole.

Electrical Connection for a Portable Dishwasher

An electrical supply of 120 volts, 60 Hz, AC only, 15 amps is required. For your safety, the dishwasher must be grounded. If there is a malfunction or breakdown, grounding will reduce risk of electrical shock. This dishwasher has a power cord with a 3-prong grounding plug. It must be plugged into a mating 3- prong grounding type receptacle, installed and grounded in accordance with the National Electrical Code and any local codes and ordinances.

Electric Shock Hazard

Avoid fire hazard or electrical shock. Do not use an adapter plug, extension cord or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death.

12

Page 11 Page 13
Page 12
Image 12
Kenmore 587.1468 manual Connecting and Disconnecting Portable Dishwasher, Electric Shock Hazard
Page 11 Page 13

587.1468 specifications

The Kenmore 587.1468 is a highly regarded dishwasher that stands out for its combination of performance, efficiency, and user-friendly features. Designed to meet the demands of modern kitchens, this model is known for its reliability and innovative technologies that enhance cleaning and ensure convenience.

One of the standout features of the Kenmore 587.1468 is its advanced cleaning system. Equipped with a powerful motor and an efficient spray arm configuration, it provides thorough cleaning on various dishware and utensils. The multi-directional spray system ensures that water reaches every corner of the dishwasher, optimizing the cleaning process. This model also features a high-temperature wash option that removes stubborn stains and sanitizes dishes, making it ideal for households that prioritize hygiene.

In terms of energy efficiency, the Kenmore 587.1468 is Energy Star certified, which means it meets strict efficiency guidelines set by the EPA. This not only helps in reducing utility bills but also minimizes its environmental impact. The dishwasher utilizes a smart wash system that adjusts water and energy usage based on the load, ensuring that both small and large loads are washed effectively without wasting resources.

The design of the Kenmore 587.1468 also prioritizes user convenience. It includes an intuitive control panel with multiple wash cycle options, allowing users to choose the best setting for their specific cleaning needs. Options include normal wash, heavy-duty, and quick wash cycles. The dishwasher also has a delay start feature, which can be programmed to run at more convenient times, such as during off-peak hours or overnight.

Another notable characteristic is its spacious interior. The Kenmore 587.1468 can accommodate a variety of dishware sizes, including large pots and pans, thanks to its adjustable and removable shelves. The flexible rack system allows users to optimize space for dish placement, facilitating easy loading and unloading.

Moreover, the noise level is impressively low, making this dishwasher suitable for open-plan living spaces where quiet operation is essential. With a sleek and modern design, the Kenmore 587.1468 not only operates efficiently but also complements the aesthetic of contemporary kitchens.

In conclusion, the Kenmore 587.1468 dishwasher is a combination of innovative technology, user-friendly features, and energy efficiency, making it a valuable addition to any household seeking reliable cleaning performance. With its robust cleaning capabilities and thoughtful design, it stands as a top choice for discerning consumers.
Top Page Image Contents