Operating Instructions
Vent
Latch X
o,J , 6u/_ _
Getting Started
1.Load dishwasher (See Preparing and Loading Dishes).
2.Add detergent (See Dishwasher Dispenser & Detergents).
3.Add rinse aid, if needed (See Rinse Aid).
4.Turn dial clockwise to select cycle (See Cycle Chart) or number of hours for wash delay.
,Select desired OPTIONS (See Option Selections). The indicator will show red when selected.
,If using WASH DELAY, go to step number 8.
7.Run hot water faucet nearest dishwasher until water is hot. Turn water off.
8.To start, close door to latch.
Wash Delay
Allows you to delay starting the HEAVY WASH cycle.
•Turn dial to select number of hours.
•Select HIGH TEMP WASH option and other desired options.
•CIosedoortolatch.
Appearance may vary from your model.
Plate Warmer
For warming dishes and serving plates before serving hot foods:
•Load clean plates and dishes to be warmed.
•Turn dial to PLATE WARMER.
•Select HEAT DRYoption.
Status Indicator Lights
When DELAY START option is selected, the Delay Start light will glow as timer counts down to begin cycle.
The WASHING LIGHT comes on at the beginning of the cycle and remains on until the end of the main wash.
CLEAN light comes on when a cycle is complete. To turn it off, turn dial slightly until light goes off.
