KEEPING THE WATER SOFTENER CLEAN

NOZZLE & VENTURI

A clean nozzle and venturi (see Fig. 57) is a must for the softener to work right. This small unit moves brine from the salt storage tank to the resin tank during regeneration. If it becomes plugged with sand, silt, dirt, etc., the softener will not work and you will get hard water.

To clean the nozzle and venturi, complete the following steps:

1.Remove the softener top cover. Be sure the softener is in service cycle (no water pressure at nozzle and venturi).

2.Turn off the cap from the nozzle and venturi housing.

3.Lift out the screen support and screen. Do not lose the large o-ring seal.

4.Remove the nozzle and venturi. Wash and rinse the parts in warm water until clean. If needed, use a small brush to remove iron or dirt. Also check and clean the gasket, flow plugs and screens.

5.Carefully replace all parts in the correct order.

6.Lubricate the o-ring seal with silicone grease or Vaseline and place in position.

7.Install and tighten the cap, by hand only. Do not overtighten, which may break the cap or housing.

IRON FROM RESIN BED

Your water softener takes hardness minerals (calcium

and magnesium) out of the water. It can also control some "clear water" iron. See maximum allowed in the

specifications section in this manual. With clear water iron, water from a faucet is clear when first put into a

glass. After 15 to 30 minutes, the water begins to cloud or turn rust colored. A water softener WILL NOT remove

any iron which makes the water cloudy or rusty as it comes from the faucet (called red water iron). To take red water iron out of water, or over the maximum of clear water iron, an iron filter or other equipment is needed. Your local Sears store has trained people to help you with iron water problems.

If your water supply has clear water iron, even though less than the maximum allowed, regular resin bed

cleaning is needed, Your local Sears store has resin bed cleaner for this, See Parts List in back of manual

for part numbers, Clean the bed at least every six (6) months, If iron shows up in the soft water before six (6) months, clean more often, Printed instructions are on the resin bed cleaner bottle,

Cleaning Nozzle & Venturi

Cap

the gasket are centered directly

over the small holes in the nozzle & venturi housing.

*Flow Plug (HVDC)

Nozzle & Venturi/Z"

Housing

*Install with numbered side up concave side down. Be sure the largest flow plug is located in the nozzle & venturi housing.

FIG. 57

Questions? Call The Kenmore Water Line 1-800-426-9345

33

Page 32 Page 34
Page 33
Image 33
Kenmore 625.38426 owner manual Keeping the Water Softener Clean Nozzle & Venturi, Iron from Resin BED
Page 32 Page 34

625.38426 specifications

The Kenmore 625.38426 is a mechanical marvel in the world of household appliances, specifically designed for those who value efficiency, convenience, and performance in their laundry tasks. As a top-load washing machine, this model is perfect for families or individuals looking for a reliable and effective solution for their washing needs.

One of the most notable features of the Kenmore 625.38426 is its impressive capacity. With a large drum that can handle up to 3.8 cubic feet of laundry, this machine can accommodate a significant amount of clothing in a single load, saving precious time and energy. This is especially beneficial for larger households or anyone with a heavy laundry routine.

The washing machine is equipped with a variety of wash cycles tailored to meet various fabric care requirements. Users can choose from multiple settings, including delicate, normal, heavy-duty, and quick wash cycles. This versatility ensures that delicate garments are treated with extra care while tough stains on durable fabrics can be effectively tackled.

In addition to its array of cycles, the Kenmore 625.38426 boasts innovative technologies that enhance its functionality. The machine features a dual-action agitator that effectively moves clothes throughout the wash cycle, ensuring thorough cleaning without causing damage to the fabrics. This means users can confidently clean a wide range of clothing items, from casual wear to more sensitive materials.

Energy efficiency is another critical aspect of the Kenmore 625.38426. This model utilizes advanced technology to minimize water and electricity consumption while delivering optimal cleaning performance. This is not only beneficial for the environment, but it also translates into cost savings on utility bills over time.

The control panel of the Kenmore 625.38426 is user-friendly, featuring clearly labeled options and easy-to-understand settings. This intuitive design allows users to quickly select their desired wash cycle without any confusion.

Durability and longevity are also hallmarks of this washing machine. Constructed with high-quality materials, the Kenmore 625.38426 is designed to withstand regular use while maintaining its performance over the years.

In summary, the Kenmore 625.38426 emerges as a powerful and efficient washing machine that combines capacity, versatility, and energy efficiency. With its user-friendly features and robust construction, it stands out as a top choice for those looking to invest in a reliable laundry appliance that meets modern household demands.
Top Page Image Contents