ROTARYVALVESERVICE

IMPORTANT: Before working on the valve, turn off the water supply and disconnect from electrical power.

TO RELIEVE PRESSURE:

•3 VALVE BYPASS: Close the inlet valve and open a soft water faucet. Then close the outlet valve and open the bypass valve.

•SEARS SPECIAL BYPASS: Slide the bypass valve stem to bypass position. Loosen three hex head screws toward the back side of the valve to allow pressure water to bleed out. Catch water with a rag.

DISASSEMBLY

To remove a part or group of parts, refer to the valve drawing. A common screwdriver or nut driver, Phillips screwdriver and pliers are the only tools needed to com- pletely disassemble.

SERVICING THE VALVE

Inspect all o-rings, seals and gaskets for wear or defects.

Inspect the bottom surface of the rotor for scratches, chips or wear.

Note: If replacement is needed, be sure to use the current replacement part.

ASSEMBLY

Be sure all parts are in place and in the proper position. Lubricate ALL o-rings and seals with FDA approved sili- cone grease. To install the rotor seal, first place the seal into the valve groove, rounded side down (see cross-sec- tion). Apply a light coating of silicone grease to the seal's crossing ribs. Then, carefully center the wear strip on the seal, and push it downward onto the seal.

Install the nozzle and venturi seal and drain seal. Assemble wave washer bearing, the wave washer, and two o-rings, onto the rotor top shaft. Then center the rotor in the valve body, on the rotor seal.

Lower the cover onto the valve body and rotor shaft. Then install the cover holding screws. Before tightening the screws, install the valve cam and gear.

Then, turn the rotor (clockwise only) to service position. Tighten the screws using a criss-cross pattern. If a torque wrench is available, torque to 30-40 inch pounds. Do not over tighten.

Lubricate the gear on the motor, and the valve cam gear with Molykote grease, or other high quality gear lubricant.

Be sure to orient switch as shown, with lever toward the cam.

See Nozzle

Assembly Service

FIG. 68

Questions? Call The Kenmore Water Line 1-800-426-9345

42

Page 41 Page 43
Page 42
Image 42
Kenmore 625.38426 owner manual To Relieve Pressure, Disassembly, Servicing the Valve, Assembly
Page 41 Page 43

625.38426 specifications

The Kenmore 625.38426 is a mechanical marvel in the world of household appliances, specifically designed for those who value efficiency, convenience, and performance in their laundry tasks. As a top-load washing machine, this model is perfect for families or individuals looking for a reliable and effective solution for their washing needs.

One of the most notable features of the Kenmore 625.38426 is its impressive capacity. With a large drum that can handle up to 3.8 cubic feet of laundry, this machine can accommodate a significant amount of clothing in a single load, saving precious time and energy. This is especially beneficial for larger households or anyone with a heavy laundry routine.

The washing machine is equipped with a variety of wash cycles tailored to meet various fabric care requirements. Users can choose from multiple settings, including delicate, normal, heavy-duty, and quick wash cycles. This versatility ensures that delicate garments are treated with extra care while tough stains on durable fabrics can be effectively tackled.

In addition to its array of cycles, the Kenmore 625.38426 boasts innovative technologies that enhance its functionality. The machine features a dual-action agitator that effectively moves clothes throughout the wash cycle, ensuring thorough cleaning without causing damage to the fabrics. This means users can confidently clean a wide range of clothing items, from casual wear to more sensitive materials.

Energy efficiency is another critical aspect of the Kenmore 625.38426. This model utilizes advanced technology to minimize water and electricity consumption while delivering optimal cleaning performance. This is not only beneficial for the environment, but it also translates into cost savings on utility bills over time.

The control panel of the Kenmore 625.38426 is user-friendly, featuring clearly labeled options and easy-to-understand settings. This intuitive design allows users to quickly select their desired wash cycle without any confusion.

Durability and longevity are also hallmarks of this washing machine. Constructed with high-quality materials, the Kenmore 625.38426 is designed to withstand regular use while maintaining its performance over the years.

In summary, the Kenmore 625.38426 emerges as a powerful and efficient washing machine that combines capacity, versatility, and energy efficiency. With its user-friendly features and robust construction, it stands out as a top choice for those looking to invest in a reliable laundry appliance that meets modern household demands.
Top Page Image Contents