Kenmore 625.38501 manual Specifications, Troubleshooting, Problem Taste and/or Odor

Specifications

Supply water pressure limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-125 psi (207-862 kPa) Supply water temperature limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-100 °F (5-40 °C) Inlet - Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/8” O.D. tubing, included

This system conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substantiated by test data.

Installations In The Commonwealth Of Massachusetts: The Commonwealth of Massachusetts requires instal- lation be performed by a licensed plumber. Plumbing code 248--CMR of the Commonwealth of Massachusetts must be followed in these cases.

Troubleshooting

Problem: Taste and/or Odor.

Cause: Pre & Post filter expended. Correction: Replace the filter cartridges. See Page 9.

Cause: System contaminated.Correction: Sanitize system. Call 1-800-426-9345 for instructions.

Problem: Faucet LED indicator light does not function after battery change.

Cause:	Battery dead.	Correction:	Replace with new battery. See Page 9.
Cause:	Battery installed incorrectly..	Correction:	Install battery correctly.

Problem: Water leaks at push connect fittings.

Cause:	Tubing not pushed in all the way.	Correction: Push Tubing all the way into fittings. See Page 8.
Cause:	Tubing not cut square.	Correction: Cut tubing square. See Page 8.
Cause:		Correction:	Remove tube from connection. Remove nicked portion
	Tubing nicked.		by cutting tube to shorter length. Reinsert in connection
			See Page 8.
Cause:		Correction:	Remove tube from connection. Remove problem area
	Outer tubing surface not smooth.		by cutting tube to shorter length. Reinsert in connection
			See Page 8.

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

10