Kenmore 625.38501 manual Plan Your Installation, Typical Under Sink Installation, Tools Needed

Plan Your Installation

PLAN YOUR INSTALLATION

It is recommended to read through the entire manual before beginning your installation. Follow all steps exactly. Reading this manual will also help you get all the benefits from your system.

TYPICAL UNDER SINK LOCATION

The Advanced Two-Stage Drinking Water Filter housing is normally located under the kitchen and/or bathroom sink, to filter the cold drinking water. See Figure 2.

CHECK SPACE REQUIREMENTS

Check size and position of items for proper installation into location chosen.

TOOLS NEEDED

Review the tools needed list. See Figure 1. Gather need- ed tools before proceeding with the installation. Read and follow the instructions provided with any tools list- ed here.

IMPORTANT: A 1-1/4” dia. hole is needed to mount the filtered water faucet. To avoid damaging the sink, con- sult a qualified plumber or installer for drilling proce- dures in porcelain or stainless steel.

Tools Needed

Phillips Screwdriver

Adjustable Wrench

Drill & 1-1/4” bit, if required

Large Adjustable Jaw Pliers or Pipe Wrench

Figure 1

Typical Under Sink Installation

filtered water faucet

SINK

cold water

blue tubing

WATER OUT

supply fittingyellow tubing

WATER IN

cold shutoff

Figure 2

Filter Housing may be placed horizontally OR vertically

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

5