[i!i !! :i _ !! :i _ !! :i :i SECTION 3

CARE OF YOUR WATER SOFTENER

C. PROTECT THE WATER SOFTENER

If the softener is installed where it could fl_eeze

(summer cabin, lake home, etc.), you must drain all

water from it to stop possible freeze damage. To drain the softener:

FROM FREEZING

Drain All Water From Softener

_1_ Close the shut-off valve on the house main wa-

ter pipe, near the water ineter or pressure tank.

_! Open a faucet in the soft water pipes to vent

pressure in the softener.

_ Refer to FIG. 14 on page 4-1. Move the stem in a single bypass valve to bypass. Close the inlet and outlet valve in a 3-valve bypass system, and open the bypass valve. If you want water in the house pipes again, reopen the shut-off valve on the main water pipe.

_ Unplug the transformer at the wall outlet. Re- move the salt hole cover and the main cover. Take off both drain hoses.

_ Carefully remove the large holding clips at the

softener inlet and outlet. Separate the softener from the copper tubes, or from the bypass valve.

_1_ Remove the brinewell cover and disconnect the brine valve tubing at the nozzle and venturi as- sembly (see page 3-2). Lift the brine valve out of

the brinewell. Tip the brine valve upside down to drain water.

drain wood block

m Looking at FIG. 12, lay a piece of 2 inch thick board near the floor drain. Move the softener

close to the drain. SLOWLY and CAREFULLY,

tip it over until the rim rests on the wood block with the inlet and outlet over the drain. Do not

allow the softener's weight to rest on the inlet and outlet fittings or they will break.

m Tip the bottom of the softener up a few inches

and hold until all water has drained. Leave the

softener laying like this until you are ready to use it. Plug the inlet and outlet with rags to keep dirt, bugs, etc. out.

3-3

Problems, Questions? Call 1- 800- 426- 9345 Kenmore Water Line

Page 17 Page 19
Page 18
Image 18
Kenmore 625.38888 owner manual Protect the Water Softener, From Freezing
Page 17 Page 19

625.3888, 625.38888 specifications

The Kenmore 625.38888 and 625.3888 are high-efficiency water softeners that cater to households with diverse water quality needs. Known for their advanced technology and reliable performance, these models are designed to tackle hard water issues while enhancing water quality and extending the lifespan of plumbing appliances.

One of the main features of the Kenmore 625.38888 and 625.3888 is their highly efficient ion-exchange process. This process effectively removes hard minerals such as calcium and magnesium from the water, which helps to prevent scale buildup in pipes, appliances, and fixtures. By softening the water, these models improve the effectiveness of soaps and detergents, leading to cleaner dishes, brighter laundry, and reduced soap scum.

Both models boast a user-friendly digital control panel, which allows homeowners to easily monitor and adjust settings. This digital interface includes features such as a programmable regeneration cycle, which can be set based on water usage patterns. This ensures that the softener operates efficiently and only regenerates as needed, saving salt and water in the process.

Another characteristic worth mentioning is the high-capacity resin tank used in these models. With a robust design, the resin tank can handle larger volumes of water, making it ideal for families or homes with significant water demands. Additionally, the Kenmore 625.38888 and 625.3888 are equipped with a corrosion-proof brine tank, which enhances durability and reduces the risk of leaks or damage over time.

The installation of these water softeners is straightforward, allowing users to have them up and running with minimal hassle. Along with a comprehensive installation guide, these models typically come with essential components needed for hook-up. The compact design ensures that they can fit in smaller spaces without overwhelming the area.

In terms of maintenance, the Kenmore 625.38888 and 625.3888 require minimal upkeep. Regularly checking and refilling the salt in the brine tank ensures optimal functioning, while periodic cleaning of the resin tank maintains efficiency.

In summary, the Kenmore 625.38888 and 625.3888 water softeners provide a reliable solution for hard water challenges. With their efficient ion-exchange technology, user-friendly controls, high-capacity design, and easy installation and maintenance, these models are well-suited for various households looking to enhance their water quality.
Top Page Image Contents