Kenmore 665.13245, 665.13465, 665.77925 manual Start-Upguide, How the smartwash TM wash cycle works

Models: 665.13475 665.13455 665.77925 665.13245 665.13465

1 19
Download 19 pages 33.64 Kb
Page 6
Image 6
How the smartwash TM wash cycle works

_) T_A _ CH _ _

The ULTRA WASH _ Soil Removal System gives you sparkling clean dishes, while using less energy and time. The ULTRA WASH _ Soil Removal System includes:

A Triple Action Filtration system that intermittently filters soil from the wash water, thus eliminating the need to scrape dishes.

How the smartwash TM wash cycle works

When the smartwash TM cycle is selected, it saves energy and water by adjusting the wash cycle as needed.

Sensors detect the size of the dish load, the soil level, and the water temperature in the dishwasher.

Sensors automatically adjust the temperature and the amount of water used for the load.

An ULTRA WASH _ optical soil sensor that detects soil level and detergent quantity appearing in the wash water and adjusts the cycles as needed.

An Automatic Temperature Control (ATC) that ensures the proper water temperature for the selected wash cycle, dish load size, and soil level of the load.

This dishwasher will automatically calibrate the sensor approximately once a year to your water quality.

IMPORTANT: The very first wash cycle after installation in your home will be adjusted to include an additional 2 rinses for optical soil sensor calibration. For proper calibration, the first cycle should not be interrupted. If this calibration cycle is canceled or stopped before the Clean light comes on at the end of the cycle, the next wash cycle will repeat this sensor calibration.

START-UP GUIDE

Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety information and useful operating tips.

1.Rinse aid is essential for good drying. Be sure to fill the

dispenser before you use your new dishwasher. Each filling will last about 1 to 3 months depending on your usage.

5.Push door firmly closed. The door latches automatically.

6.Run hot water at the sink nearest your dishwasher until the water is hot. (See "Dishwasher Efficiency Tips.") Turn off water.

2.Scrape large food soil and hard items (toothpicks or bones) from dishes.

3.

 

 

 

7.

Press the desired cycle

and option selections. (See

Properly load

the dishwasher. (See "Dishwasher

Loading.")

"Dishwasher Use.")

 

 

Load dishes with space in between so water will reach the

O

 

 

soiled surfaces. Make sure nothing keeps the spray arm(s)

 

 

 

 

 

from

spinning

freely.

 

 

 

 

 

 

 

8.

Press START/RESUME,

or press START/RESUME to repeat

 

 

 

 

 

the same cycle and options as the previous cycle.

 

 

 

 

 

IMPORTANT: The Start/Resume light will flash if the door is

4.

Add

detergent.

Always use a high-quality brand

detergent.

opened during a cycle. Power interruptions during a cycle

 

 

(See "Dishwasher Use.")

may also cause the Start/Resume light to flash. Press START/

RESUME to continue a cycle.

 

6

Page 6
Image 6
Kenmore 665.13245, 665.13465, 665.77925, 665.13455, 665.13475 manual Start-Upguide, How the smartwash TM wash cycle works