Kenmore 665.77925, 665.13465, 665.13245, 665.13455 manual Dishwasher Loading, Quiet operating tips

Models: 665.13475 665.13455 665.77925 665.13245 665.13465

1 19
Download 19 pages 33.64 Kb
Page 7
Image 7
DISHWASHER LOADING

DISHWASHER LOADING

Remove leftover food, bones, toothpicks and other hard items from the dishes. To conserve water and energy and

save time, it is not necessary to rinse dishes before putting them into the dishwasher.

NOTE: Prerinsing dishes soiled with tomato-based products is recommended to avoid staining the dishware.

The wash module removes food particles from the water. The module contains a triple action filtration system that intermittently filters soil from the water.

NOTE: If hard items such as fruit seeds, nuts, and eggshells enter the wash module, you might hear grinding, crunching, or buzzing sounds. These sounds are normal when hard items enter the module. To avoid damage to the dishwasher,

do not let metallic items (such as pot handle screws) get into the wash module.

For best drying, water must be able to drain from all surfaces.

It is important for the water spray to reach all soiled surfaces.

Load dishes so they are not stacked or overlapping if possible.

Load heavy pots and pans gently. Heavy items can damage the interior of the door if they are dropped or bumped.

The top rack is designed for cups, glasses, and smaller items. Many items, up to 9" (22 cm), fit in the top rack. (See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the drawings shown.

10 place setting

Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not interfere with the spray arm rotation.

Conserve water and energy and save time over hand rinsing by running a rinse cycle to keep dishes moist if you do not plan to wash them soon. Foods such as eggs, rice, pasta, spinach, and cooked cereals may be hard to remove if they are left to dry over a period of time.

Place items so open ends face down for best cleaning and draining.

Quiet operating tips

To avoid thumping/clattering noises during operation:

Make sure lightweight load items are secured in the racks.

Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not touch interior walls or interfere with the rotation of

the spray arm(s).

Load dishes so they do not touch one another.

NOTE: For built-in models, keep sink drain plugs closed during dishwasher operation to avoid noise transfer through drains.

Place items so open ends face down for cleaning and draining.

Load glasses in top rack only. The bottom rack is not designed for glasses. Damage can occur.

Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage and water spots.

China, crystal, and other delicate items must not touch each other during dishwasher operation. Damage may occur.

Load lightweight plastic items in the top rack only. Only plastic items marked "dishwasher safe" are recommended.

Load plastic items so the force of the spray does not move them during the cycle.

To avoid chipping, do not let stemware touch other items.

Small bowls, pans, and other utensils can be placed in the top rack. Load bowls in the center section for most stability.

12 place setting

7

Page 7
Image 7
Kenmore 665.77925, 665.13465, 665.13245, 665.13455, 665.13475 manual Dishwasher Loading, Quiet operating tips