Kenmore 665.17422, 665.17425 manual Dishwasher, Connecting Your, Preparing the faucet

5.Push door firmly closed. The door latches automatically. Run hot water at the sink where you will

connect dishwasher until water is hot. (See "Dishwasher Efficiency Tips.") Turn off the water and hook the dishwasher to the faucet. (See "Connecting Your Dishwasher.") Turn on the hot water.

I

-dt

CONNECTING YOUR

DISHWASHER

6.Press the desired cycle and option selections. (See "Using Your Dishwasher.") Turn the Cycle Control knob to the desired cycle to start.

NOTE: A special adapter must be installed on the faucet before the dishwasher can be connected. Complete Installation Instructions and the adapter are packed with your dishwasher. (See the Installation Instructions).

When moving your dishwasher make sure the door is latched. Hold the dishwasher at the top front corners.

Preparing the faucet

1.Remove the screen holder or aerator, screen, and washer from the end of the faucet.

2.Use the faucet adapter kit that came with your portable dishwasher to modify the faucet where the dishwasher will be used.

I O

2

1.Washer

2.Screen

3.Screen holder or aerator

NOTE: Remove and save the washer, screen, and screen holder or aerator for future use.

Connecting the faucet adapter to faucets with external threads

Insert the two screens and then the thin washer from the

faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet.

3

1.Thin washer

2.Screens

3.Faucet adapter

NOTE: Do not use the thick washer.

8