Kenmore 665.17422 Using Your Dishwasher, Where to fill, Filling the dispenser, Water Hardness

Models: 665.17425 665.17422

1 20
Download 20 pages 52.01 Kb
Page 12
Image 12
USING YOUR

USING YOUR

DISHWASHER

The detergent dispenser has 2 sections. The Pre-Wash

section empties detergent into the dishwasher when you close the door.

1.

2.

3.

4.

1.Cover

2.Main wash section

3.Cover latch

4.Pre-wash section

Different brands of dishwasher detergent have different

amounts of phosphorous for softening water. If you have hard water and use a detergent with a

phosphorous content of less than 8.7%, you might need to use more detergent, or use a detergent with a phosphorous content higher than 8.7%.

Where to fill

Top of 3rd step (3 tbs or 45 g)

Top of 2nd step (2 tbs or 30 g)

_--_

Top of 1st step (1 tb or 15 g)

The Main Wash section automatically empties detergent into the dishwasher during the main wash. (See the "Cycle Selection CharL")

Use automatic dishwashing detergent only. Other detergents can produce excessive suds that can overflow out of the dishwasher and reduce washing performance.

Add detergent just before starting cycle.

Store tightly closed detergent in a cool, dry place. Fresh automatic dishwasher detergent results in better cleaning.

NOTE: Do not use detergent with a rinse cycle.

Filling the dispenser

1.If the dispenser cover is closed, open the cover by pushing the Cover latch.

2.Fill the Main Wash section with detergent. See "How Much Detergent to Use."

3.Close the Main Wash dispenser cover. Fill the Pre- Wash section if needed.

It is normal for the cover to open partially when dispensing detergent.

NOTE: Use both sections for cycles with 2 washes. Use only the covered section for cycles with 1 wash. See the "Cycle Selection Chart" for more details.

How much detergent to use

The amount of detergent to use depends on the hardness of your water and the type of detergent. If you

Water Hardness

Soft to Medium Hard Water

0 to 6 grains per gallon

Medium to Hard Water

7 to 12 grains per gallon

Amount of Detergent

For normally soiled loads

Fill the Main Wash section to the top of the 2nd step

(2 tbs or 30 g)

Fill the Pre-Wash section to the top of the 2nd step

(2 tbs or 30 g) if needed

NOTE: Add only 1 tb or 15 g of detergent to both sections if dishes are pre-rinsed or the water is very soft (0 to 2 grains

per gallon).

For heavily soiled loads

Fill the Main Wash section to the top of the 3rd step

(3 tbs or 45 g)

Fill the Pre-Wash section to the top of the 2rid step

(2 tbs or 30 g)

For normally soiled and heavily soiled loads

Fill the Main Wash section to the top of the 3rd step

(3 tbs or 45 g)

Fill the Pre-Wash section to the top of the 2nd step

(2 tbs or 30 g) if needed

use too little, dishes won't be clean. If you use too much in soft water, glassware will etch.

Water hardness can change over a period of time. Find out your water's hardness by asking your local water department, water softener company, or county extension agent.

NOTE: Fill amounts shown are for standard powdered detergent. Amounts may vary if you use liquid or concentrated powdered detergent. Follow instructions on the package when using liquid dishwasher detergent or concentrated powdered detergent.

12

Page 12
Image 12
Kenmore 665.17422 Using Your Dishwasher, Where to fill, Filling the dispenser, How much detergent to use, Water Hardness