Kenmore 790.428 manual Occurrence, POSSmBLE CAUSE/SOLUTmON

Before You Calt

°Solutions to Common Problems (cont'd)

OCCURRENCE POSSmBLE CAUSE/SOLUTmON

Cooktop Zone ControJ displays E and 2 digit LED Main Control displays 00, 0:7, 0_, 05, 05 or 07

Cooking Zone LED continuousJy flashes F

Metal marks on ceramic cooktop surface

Scratches or abrasions on ceramic cooktop surface

Brown streaks or specks on ceramic cooktopsurface

Areas of discoJoration with metallic sheen on ceramic cooktop surface

induction Cooktop main control has detected a fault or error condition, Try turning electrical power supply OFF and back ON to cooktop in order to reset Cooktop

main controls, If fault recurs, record fault numberand turn power supply to

Cooktop OFF, Call 1-800-4-MY-HOME® for assistance (See back cover),

induction Cooktop pan detection sensors do not see the correct cookware, Test with a magnet to be sure cookware is made with induction compatible material,

Cookware has been removed from the Cooking Zone without turning the Cooking Zone OFF, Place cookware back on to the Cooking Zone or if finished cooking turn of the affected Cooking Zone,

Cookware is not centered over the Cooking Zone properly, Refer to Fig, 20 for correct cookware placement,

Sliding or scraping of metal utensils on cooktop surface, DO NOT slide cookware or cooking utensils across the cooktop surface, Use the recommended ceramic glass cooktop cleaning creme to remove the marks, See "Cooktop Cleaning & Maintenance" in the GeneraJ Care & CJeaning section (Refer to p, 13),

Coarse particles such as salt or sand between cooktop and cookware or cooking '!!..........

utensils can cause scratches, Be sure cooktop surface and bottoms of utensils are clean before placing on cooktop, Small scratches do not affect cooking and will become less visible with time,

Cleaning materials not recommended for ceramic-glass cooktop have been used, See "Cooktop Cleaning & Maintenance" in the GeneraJ Care & Cleaning section,

Cookware with rough bottoms were used, Use smooth, fiat-bottomed cookware ONLY (See Figs, 20 & 21 ),

Boil overs are cooked onto cooktop surface, Use a razor blade scraper to remove soil, See "Cooktop Cleaning & Maintenance" in the GeneraJ Care & Cleaning section (Refer to p, 13),

Mineral deposits from food and/or water, Remove using a ceramic-glass cooktop cleaning creme, Remember to use cookware with clean, dry bottoms, For more information See "Cooktop Cleaning and Maintenance" in the GeneraJ Care & Cteaning section,

15