General Cleaning
Cleaning Various Parts of Your Appliance
Before cleaning any part of the warmer drawer, be sure all controls are turned OFF and the warmer drawer is
COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE EXTENT AND DIFFICULTY OF MAJOR CLEANING LATER.
Surface
Gloss
Drawer Front Panel
How to Clean
You may use a glass cleaner on the outside glass of the drawer. DO NOT immerse the drawer in water. DO NOT sproy or allow water or the glass cleaner to enter behind the drawer glass panel. DO NOT use oven cleaners, cleaning powders or any harsh abrasive cleaning materials on the outside of the drawer.
Plosfic
Control Knobs
To remove control knob, turn to the OFF position; grasp firmly and pull straight off: the shaft. Clean with a cloth soaked in soapy water. Rinse with a clean water and a dishcloth. To replace knob after cleaning, line up the fiat sides of both the knob and the shaft; then push the knob into place.
Note: Humidity controller knob cannot be removed.
Stalnless Steel
Porceloln Enamel
Body Parts and Drawer Cavity
Wormer Drower Rock
Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and a cloth. Do not use cleaners with high concentrations of chlorides or chlorlnes. Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made for cleaning stainless steel. Always be sure to rinse the cleaners from the surface as bluish stains may occur during heating that cannot be removed.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of clear water and ammonia, if necessary, cover difflcult spots with an ammonia=soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a soap=filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all cleaners or the porcelain may become damaged during future heating. DO NOT use spray oven cleaners.
The rack may be removed for cleaning. If removed, clean by using a mild, abrasive cleaner following manufacturer's instructions. Rinse with clean water and dry.
iii
7
