Kenmore 4931, 790.4928 manual Before Setting Warmer Drawer Control, indicator Light

Models: 4931 790.4928

1 10
Download 10 pages 46.22 Kb
Page 5
Image 5
Before Setting Warmer Drawer Control

Before Setting Warmer Drawer Control

Arranging Warmer Drawer Rack Positions

Set the warmer drawer rack in the vertical position as shown below.

The rack can be used in 2 ways:

In the upright position to allow low profile food under and on top of the rack (for example, rolls rack and a casserole dish under).

items to be placed both or biscuits on top of the

*In the downward position for placement of light weight food items and empty dishware (for example, rolls or pastries and dinner plates).

Upright Position

Setting Warmer Drawer Control

To Operate the Warmer Drawer The purpose of the warmer drawer temperature. Always start with hot cold food in the warmer drawer.

is to keep hot cooked foods at serving food. It is not recommended to heat

Downward Position

All food placed in the warmer drawer should be covered with a lid or aluminum foil to maintain moisture and softness. Do not cover crisp foods. Do not use plastic wrap to cover food. Plastic may melt onto the drawer and be very difficult to clean.

Use only dishware, utensils and cookware recommended for oven use in the warmer drawer.

Always use potholders or oven mitts when removing food from the warmer drawer as cookware and plates will be hot.

indicator Light

The indicator light is located below the thermostat control knob. It turns on when the control is set, and stays on until the control is turned off. Make sure indicator light is off when removing food from drawer.

Warmer Drawer Humidity Controller Feature

This feature may be used to control humidity in the Warmer Drawer. The control knob is located on the inner front panel of the Warmer Drawer.

For dry heat: Slide the humidity control knob in the direction of less moist

___ (Figure 1). This allows more of the moist heat to escape and provides

a dryer environment for the food in the Warmer Drawer.

Figure 1

For moist heat: Slide the humidity control knob in the direction of more

moist (_ (Figure 2). This will help keep the food in the Warmer Drawer

from drying out. Both heat and moisture will be applied to the Warmer

Drawer cavity.

Note: For some types of servings you may want to store previously prepared food in a "dry heat" environment. For frequent controller adjustments, slide the control knob to any desired position.

Figure 2

Page 5
Image 5
Kenmore 4931, 790.4928 manual Before Setting Warmer Drawer Control, indicator Light, Arranging Warmer Drawer Rack Positions