Kenmore 790.9634 Self-Cleaning contd, Stopping or Interrupting a Select Self= Cleaning Cycle

Self-Cleaning (cont'd)

The oven bake

and broil elements may appear to have cooled after they have been turned OFF. The elements may still be hot and burns may occur if these elements are touched before they have cooled sufficiently.

Baking element may be

tilted about 4 or 5 inches

to clean oven bottom,

Starting the Select Self=Clean Cycle or a

Delayed Start Self=Clean Cycle

For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or a 4 hour cycle for heavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventitlation fan or exhaust hood during the 1st Self-Clean cycle. This will help eliminate the normal odors associated with the 1st Self-Clean cycle.

To Set the Controls for a Self-Clean Cycle or a

Delayed Start Self-Clean Cycle:

(Note: If you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.)

1.Be sure the clock shows the correct time of day.

2.Press @. The " : " in the time of day will flash.

3.Press and hold the A pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed.

4.Press @. " "appears in the display.

5.Press the A or V once. "3:00" appears in the

display for acle. To change to a 2 hour cycle press "_. "2:00" appears in the display or to select a 4

hour cycle press _. "4:00" appears in the display. As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).

. "CLn" will appear in the display during the Self-Clean

cycle and the "LOCK" light will glow until the Self-

Cleaning cycle is complete or cancelled and the oven

temperature has cooled.

When the Self-Clean Cycle is Completed:

1.The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow.

2.Once the oven has cooled down for about l HOURand the "LOCK" light has gone out, the oven door can be opened.

3.If "End" is in the display and the Select Clean indicator

light remains ON, press _. The time of day will

appear in the display.

NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Select Self= Cleaning Cycle

If it becomes necessary to stop or interrupt a Self-Cleaning cycle:

1.Press @.

2.Once the oven has cooled down for about l HOURand

the "LOCK" light has gone out, the oven door can be opened.

3.Restart the Self-Clean cycle once all conditions have been corrected.

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This carl damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be

VERY HOT.

18