Kenmore 790 manual Oven Control Functions, Setting Oven Controls, For a silent control panel

Oven Control Functions

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with

the various pad functions of the oven as described below.

CLOCK SET	COOK TIME		FEATURE		UP and DOWN ARROW PADS—	ADD 1 MINUTE — BAKE PAD—
PAD— Used	PAD— Used to		INDICATOR		Used along with the function pads to
						Use to select Add 1 Used to select
to set the	enter the length of		LIGHTS— These		select oven temperature, cook time,	Minute feature.	the bake
time of day.	the baking time.		light to show		start time (when programming an
							function.
			which	feature is	automatic start time), time of day,
OVEN INTERIOR			in use.		clean time and minute timer.		BROIL PAD— Used to
							select the variable broil
LIGHT PAD— Used to
							function.
turn oven interior light
ON or OFF. This pad is							SLOW COOK PAD—
also used to activate
							Used to set the Slow Cook
the Cooktop Lockout
							feature.
feature (some models).
SELECT SELF-CLEAN							WARM & HOLD PAD—
PAD— Used to select							Used to set the Warm &
the Self-Cleaning							Hold feature.
cycle. A 2, 3 or 4 hour							RECIPE RECALL PAD—
Self-Clean time may be
							Used to set the Recipe
selected.
							Recall feature.
TIMER SET/OFF		DELAY START		OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN"			STOP/CLEAR PAD—
PAD— Used to set or		PAD— Used to		light will glow each time the oven turns on to maintain the set			Used to clear any
cancel the minute		set the desired		oven temperature. The "PREHEAT" light will glow when the			function previously
timer. The minute timer		start time for		oven is first set to operate, or if the desired temperature is reset			entered except the time
does not start or stop		baking & Self-		higher than the actual oven temperature. The "DOOR LOCKED"			of day and minute timer.
cooking. Also,		Clean. May be		light will flash when the oven door locks and unlocks or when			Press STOP/CLEAR to
TIMER SET/OFF pad		used with COOK		using the Self-Clean cycle or the oven door lockout is activated.			stop cooking. Also the
is used to set the		TIME to program		The indicator light will glow constantly after the door			STOP/CLEAR pad is
Continuous Bake		a delayed bake		locks.COOKTOP LOCKED light will glow when the cooktop has			used to activate oven
feature.		cycle.		been locked (some models).			door lockout setting.

ENGLISH

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the

preheat indicator light turns OFF, your oven is ready.

For a silent control panel

When choosing a function, a beep will sound each time a pad is pressed. If desired, the control can be programmed for silent operation. To switch back and forth between normal sound or silent operation:

Press & hold . After 7 seconds, the control will beep once.

:SP should appear in the display indicating that the control is in

normal sound mode. Press either or once to change

to silent mode (:- - will appear in the display). The silent mode will block the controls from sounding when a pad is pressed.

To return to normal sound operation, press & hold . After 7

seconds :- - will appear in the display. Press either or

once to change back to normal sound mode (:SP will

appear in the display). The control will now provide normal audible beeps whenever a pad is pressed.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press . "— —" appears in the display.

2.Press and hold the until "HI" appears in the display.

3.Press and hold until °F or °C appears in the display.

4.Press the or to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

Setting Oven Controls

Note: The time of day must first be set in order to operate the oven.

To Set the Clock

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1.Press once (do not hold pad down).

2.Within 5 seconds, press and hold the or until the

correct time of day appears in the display.

Note: The clock cannot be changed during any timed bake or Self-Clean cycle.

9