Kenmore 795.7104 Adjusting Control Settings, Airflow, Caution When Closing the Door, •, Caution

Models: 795.7104

1 36
Download 36 pages 58.88 Kb
Page 19
Image 19
Airflow

Airflow

In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. The arrows in the figure indicate air vent locations and direction of airflow.

Do not block any of the cool air vents with food

packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur.

If you add a large amount of food, the refrigerator will take longer to cool it.

At initial start-up, allow your refrigerator to run for 2 or 3 hours before placing food in it.

Caution When Closing the Door

The refrigerator control functions as the thermostat for the entire appliance (refrigerator and freezer sections). The colder the setting, the longer the compressor will run to keep the temperature colder. The freezer control adjusts the cold air flow from the freezer to the refrigerator. Setting the freezer control to a lower temperature keeps more cold air in the freezer compartment to make it colder.

If you need to adjust temperatures in the refrigerator or freezer, start by adjusting the refrigerator and allow 24 hours for the temperatures to stabilize. If it

is still too warm or too cold, then adjust the freezer control.

Always remember to wait at least 24 hours between adjustments.

CONDITION/RECOMMENDED

REASON:ADJUSTMENT:

[] REFRIGERATOR section too

warm

-Door opened often

-Large amount of food added

-Room temperature very warm

Adjust the REFRIGERATOR temperature.

Note: When changing temperature settings,make

adjustments one increment at a time and wait 24 hours

between adjustments.

, CAUTION

To reduce the risk of door scratches and breaking the door mullion, please make sure that the refrigerator door mullion is always folded in.

If moisture gathers on the refrigerator door mullion at any point, turn off the Energy Saver mode until the issue is resolved.

ADJUSTING CONTROL SETTINGS

[] FREEZER section too

Adjust the REFRIGERATOR

warm/ice not made fast enough

temperature.

- Door opened often

Note: When changing

- Large amount of food added

temperature settings, make

- Very cold (below 55 °F) room

adjustments one increment at

temperature (Compressor does

a time and wait 24 hours

not cycle often enough)

between adjustments.

- Heavy ice usage

Move items out of airstream

- Air vents blocked by items

[] REFRIGERATOR section too

Adjust the REFRIGERATOR

cold

temperature.

- Controls not set correctly for

Note: When changing

your conditions

temperature settings, make

 

adjustments one increment at

 

a time and wait 24 hours

 

between adjustments.

It is best to wait 24 hours for the refrigerator to cool down completely before making any adjustments to the temperature settings. The initial settings mentioned in SETTING THE CONTROLS section should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

[] FREEZER section too cold

-Controls not set correctly for your conditions

Adjust the REFRIGERATOR temperature.

Note: When changing temperature settings, make

adjustments one increment at a time and wait 24 hours

between adjustments.

19

Page 19
Image 19
Kenmore 795.7104 manual Adjusting Control Settings, Airflow, Do not block any of the cool air vents with food, •, Caution