HOW TO REMOVE AND INSTALL THE PULL OUT DRAWER
1. Removing Pull out Drawer
IMPORTANT: To avoid possible injury, product or property damage, you will need two persons to perform the following instructions.
•Pull the drawer open to full lower extension. Remove the durabase by lifting it from rail system.
Fig. 1 | _._ I |
_ __ Durabase
[] CAUTION: When removing drawer door, do not hold it by the handle. The door could fall down and you may be injured. Grasp the door with both hands as pictured below when removing.
[] CAUTION: When laying down the drawer, be careful not to damage the floor or hurt your feet with the sharp edges on hinge side.
With both hands, hold both sides of the door and pull it up to separate it from the rails.
Fig. 5
•Press both hangers with yours thumbs to lift it up. Fig. 2
•Separate the left and right rail cover Fig. 3
•Remove the screws of the rail on both sides. Fig. 4
screw
Fig. 6 | _R | D°°r |
|
| supports |
ail tabes
'h
°Push the rails back into drawer cavity. With both hands, hold the center of the bar and push it in so that both rails go back simultaneously.
Fig. 7
Fig. 8
12
