REFRIGERATOR SECTION
REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to meet your individual storage needs. These units are all glass shelves.
IMPORTANT: Do not clean glass shelves with warm water when they are cold. Shelves may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, glass shelves are made with tempered glass, which will shatter into small pebble- sized pieces.
NOTE: Glass shelves are heavy. Use special care when removing them to avoid dropping them.
Adjusting Shelves
Remove shelves from the shipping position and place the shelves in the position you want.
•To remove a shelf: Tilt up the front of the shelf in the direction of (I) and lift it in the direction of (2). Pull the shelf out.
•To replace a shelf: Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. Then lower the front of the shelf so that the hooks drop into the slots.
®
NOTE: Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf falling or the spilling food.
Sliding Out Shelves (optional on some models)
You can slide some glass shelves in and out of your refrigerator as follows.
•To slide the shelf out, carefully pull front of shelf toward you.
•To slide shelf in, push shelf in until it stops.
To remove a sliding shelf from its metal frame:
1.Pull the shelf out to the stop position.
2.Tilt the front of the shelf up and pull it past the stop position.
3.Lift up the shelf to remove.
Replace the shelf by reversing the above steps.
Convenience Shelves (optional on some models)
•Folding Shelf: You can store taller items such as gallon containers or bottles by simply sliding the shelf back.
18
