CARE AND CLEANING
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read and follow this entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.
•Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
REGULAR CLEANING
Cleaning the Exterior
Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a mild, nonabrasive household detergent.
Immediately wipe off any spills with a soft, damp cloth.
IMPORTANT: Do not use solvents, cleaning alcohols, or simi- lar products. Never use steel wool or abrasive cleaners because they can damage the surface.
Care and Cleaning of the Interior
Use a towel or soft cloth to wipe around the washer door opening, door seal, and door glass. These areas should be kept clean to ensure a watertight seal. Be sure to wipe under the inside rubber seal to remove any moisture or soil.
Always remove items from the washer as soon as the cycle is complete. Leaving damp items in the washer can cause wrinkling, color transfer, and odor. Run the CLEAN WASHER cycle once a month, or more often if needed, to remove detergent buildup and other residue.
Clean Washer
1Remove any clothing in the drum.
2Open the dispenser drawer.
3Add liquid chlorine bleach or another drum cleaner designed specifically for cleaning front load washers.
-If using liquid chlorine bleach
Add liquid chlorine bleach to the bleach compartment of the drawer. (NOTE : Do not exceed the maximum fill line and do not pour undiluted liquid bleach directly into the wash drum.)
-If using powder cleaner
Remove the liquid detergent cup and add powder cleaner to the main wash compartment of the dispenser drawer.
-If using tablet cleaner
Add tablet cleaner directly to the wash drum.
NOTE:
•Do not add tablet cleaner to the dispenser drawer.
•Do not add any laundry detergent or fabric softener to the drawer when using CLEAN WASHER.
4 | Turn ON the washer and press and hold the |
|
will blink. Selecting any other cycle after CLEAN WASHER has been selected will cause the CLEAN WASHER cycle to be cancelled.
5After the cycle ends, open the door and allow the drum interior to dry completely.
NOTE: Run the CLEAN WASHER cycle once a month. If a mildewy or musty smell is present, run the CLEAN WASHER cycle once a week for three consecutive weeks.
Door Seal and Glass Cleaning
Due to the location and nature of the door seal, some detergent and soil residue may build up on the door glass and seal. Periodic cleaning with a bleach solution can help remove buildup and stains, and can help sanitize the seal to prevent odors.
NOTE: Wear rubber gloves and eye protection while performing the following procedure:
1Dilute ¾ cup (177 ml) liquid chlorine bleach in 1 gallon (3.8 L) of warm/hot water.
2
3Dry the gasket and glass with a dry cloth.
4To allow the gasket to dry completely, secure the door slightly ajar with the door magnet. This will promote air circulation and allow the interior of the machine to dry. To use this feature, close the door just until it contacts the door magnet.
NOTE:
•Follow the manufacturer’s instructions for proper use of bleach.
•To avoid damaging the gasket, NEVER use undiluted bleach to clean the gasket.
Removing Mineral Buildup
If you live in an area with hard water, mineral scale can form on internal components of the washer. Use of a water softener is recommended in areas with hard water.
Use a descaler, such as Washer Magic®, to remove visible mineral buildup. After descaling, always run the CLEAN WASHER cycle before washing clothing. Do NOT use steel wool or abrasive cleaners.
24
